Upholstery Foam
Select the Perfect Feel
We sell the finest quality polyurethane foam for upholstery, boats, mattresses, cushions, camping & other uses. Don't waste your money on junk foam from a big box store. Get the foam that's designed and manufactured for your application.
Our premium polyurethane foam is available in a range of depths and densities from rigid to super soft. Drop by our showroom to feel the difference.
Premium Polyurethane Foam
Most foam sold in the big box stores is junk. It's inexpensive, but it doesn't provide much support. It can also "go flat" before you know it. We only sell the "good stuff". Our High Resilience (HR) foam is available in a range of sizes and densities. Quality foam costs more, but it retains it's cushioning characteristics, plus it lasts a lot longer than junk foam.
 Extra Soft |
 Soft |
 Medium Soft |
 Medium Firm |
 Firm |
 Extra Firm |
Our premium polyurethane foam is custom cut to your specifications. It's available in a range of sizes and densities; the higher the HR number the stiffer the foam. For example, HR22 is extra-soft, HR70 is stiff. The most popular upholstery foams are HR33 and HR45.
HR45 provides sturdy support without sacrificing comfort. HR33 is considerably softer. Most sofas and chairs are manufactured using HR33 or a combination of HR45 and HR33. Some prefer the cushier feel of HR33 for seat backs. HR45 is used for seat bottoms where a little more support is preferable.
If you need replacement foam, be sure to measure carefully or -- better yet -- bring the cushion down to the showroom, where our experts will help you find the foam that's right for your project.
Hot Press & Cold Press Foams
Most high quality polyurethane foams are processed using temperatures up to 250° C. This sort of foam is then cured and cut to size.
During this hot mold production process a manufacturer will adjust the properties of the polyurethane to achieve a desired strength, comfort level and durability. Because the most common grades of this foam are available in different densities, it's a perfect foam for furniture. We use this for most couch & chair cushions. These foams stay bouncy and last a long time.
Cold cure foam tends to be much denser. Because manufacturing temperatures rarely rise above 60° C, cold cure foam is ideal for injection-molded products such as car seats. This closed cell foam is more rigid and water resistant. It's also a lot more expensive than foam manufactured the other way. We do not sell closed cell foam.
Measure Before You Call!
To get the most accurate price estimate when ordering foam, be sure take three measurements before you call.
1) Measure edge thickness. Most sofa cushions are between four and six inches thick. If the foam is wrapped in Dacron® or some other material, it may appear slightly thicker. 2) Measure depth from front to back. 3) Measure the width at the widest point. Most sofa cushions are rectangular, but some have "tails" or "ears" that cover the face of the armrest. Be sure to include this when measuring the width.